A Teledyne Technologies Company Teledyne Storm Microwave

Home    About Us    Products    News    Resource Center    Careers    Contact Us    Terms and Conditions   

Web Store

Flexible Assemblies
Semi-Rigid Assemblies
Semi-Rigid Cable
Test Assemblies
Harness Solutions NEW!
Assemblies with Circular Connectors
Rectangular Connector Mini-Multimate
Rectangular Connector Vita 67
Interconnect Combinations
Qualification Testing
Photo Gallery
Resource Center
Company Info
About Us
Doing Business With Us
Video Plant Tour
Directions & Hotels
Contact Us
Environmental Data Sales Contacts

Storm Products’ cable assemblies are tested to a range of mechanical and environmental requirements, some of which are listed below. After exposure to these conditions, the assemblies did not show visible signs of damage and the VSWR, insertion loss, and connector interface dimensions remained within allowable limits.

Please note: All cable assemblies have not been tested to the same set of requirements. Detailed test procedures and test data are available upon request.

  • Cold Bend per MIL–C–17, paragraph 4.8.19

  • Stress Crack Resistance per MIL–C–17, paragraph 4.8.17

  • Dimensional Stability per MIL–C–17, paragraph 4.8.20

  • Concentrated Load per MIL–T–81490, paragraph 4.7.18

  • Tensile Load per MIL–T–81490, paragraph 4.7.17

  • Flexure per MIL–C–87104, paragraph, 5000 cycles

  • Temperature per MIL–T–81490, paragraph 4.7.9, –54° C to +150° C

  • Impact Shock per MIL–E–5272, paragraph 4.15, procedure V

  • Vibration per MIL–T–81490, paragraph 4.7.12
    (MIL–STD–202, method 204, test condition B)

  • Flammability per MIL–C–87104, paragraph

  • Humidity per MIL–T–81490, paragraph 4.7.22
    (MIL–STD–810, method 507, procedure IV)

  • Salt Fog per MIL–T–81490, paragraph 4.7.23
    (MIL–STD–810, method 509)

  • Thermal Shock per MIL–T–81490, paragraph 4.7.11
    (MIL–STD–202, method 107, 25 cycles)*

  • Water Immersion–Leakage per MIL–C–87104, paragraph, procedure II

  • Chemical Resistance per MIL–C–87104, paragraph
    • JP–4
    • Hydraulic fluid

  • Vacuum per ASTM E–595, less than 1% TML and 0.10% CVCM

*Excludes Storm Flex 141. Contact Teledyne Storm engineering for SF 141 test data.

Home | Careers | Site Map | Contact Us

Copyright © 2013 Teledyne Technologies Incorporated. All rights reserved.